Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 134)

134 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Instances
A module provides only a single instance (instance 1) of the Acknowledge
Handler Object. This instance is associated with instance 4 of the Connection
Object, the slave COS connection to a higher level master.
Instance Attributes
Services
Alarm Object (Class ID 31DH) The Alarm Object mode is a two-stage (alert and danger levels) alarm.
Class Attributes
Instances
There are 16 instances of this object.
Table 51 - Acknowledge Handler Object Instance Attributes
Attr ID
Access Rule
Name Data Type Default Value
1 Get/Set Acknowledge Timer UINT 16 ms
2 Get/Set Retry Limit USINT 1
3 Get COS Producing Connection
Instance UINT 4
Table 52 - Acknowledge Handler Object Services
Service Code
Class/Instance Usage Name
0E
h
Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
Table 53 - Alarm Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
1 Get Revision USINT Version of the implemented
object. 2 (indicates that Threshold Multiplier is
a REAL instead of USINT)