Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 120)

120 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Instance 101 - Measurement Values
This assembly instance can be selected to be sent in response to an I/O Poll
Request from a Master. This instance is the default Poll response selection for
firmware version 3 or later, and it is the only available Poll response for firmware
versions 1 and 2.
Table 34 - Instance 101 Data Format (measurement values assembly)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0…3 Channel 1 Overall value
4…7 Channel 2 Overall value
8…11 Channel 1 Gap value (Analog Input Point (AIP) Object Instance #1)
12…15 Channel 2 Gap value (AIP Object Instance #2)
16…19 Speed value
20…23 Maximum Speed value
24…27 Channel 1 Band 1 value
28…31 Channel 2 Band 1 value
32…35 Channel 1 Band 2 value
36…39 Channel 2 Band 2 value
40…43 Channel 1 Band 3 value
44…47 Channel 2 Band 3 value
48…51 Channel 1 Band 4 value
52…55 Channel 2 Band 4 value
56…59 Channel 1 Vector 1 Magnitude value
60…63 Channel 1 Vector 1 Phase value
64…67 Channel 2 Vector 1 Magnitude value
68…71 Channel 2 Vector 1 Phase value
72…75 Channel 1 Vector 2 Magnitude value
76…79 Channel 1 Vector 2 Phase value
80…83 Channel 2 Vector 2 Magnitude value
84…87 Channel 2 Vector 2 Phase value
88…91 Channel 1 Vector 3 Magnitude value
92…95 Channel 2 Vector 3 Magnitude value
96…99 Channel 1 Not 1X value (AIP Object Instance #3)
100…103 Channel 2 Not 1X value (AIP Object Instance #4)
104…107 SMAX Magnitude value (AIP Object Instance #5)
108…111 SMAX Phase value (AIP Object Instance #6)
112…115 Channel 1 Sum Harmonics value (AIP Object Instance #7)
116…119 Channel 2 Sum Harmonics (AIP Object Instance #8)
120…123 Channel 1 Position measurement
124…127 Channel 2 Position measurement
128…131 Acceleration measurement value
132 Channel 1 Measurement Mode