Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 124)

124 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Services
Discrete Input Point
Object (Class ID 08H) The Discrete Input Point Object stores information about the value of the
Setpoint Multiplier signal.
Class Attributes
15 Get Consumed Connection Path
Length UINT Number of bytes in the consumed_connection_path
attribute.
16 Get Consumed Connection Path Array of USINT Specifies the Application Object that are to receive the
data consumed by this Connection Object. See DeviceNet
Specification Volume 1 Appendix I.
17 Get Production Inhibit Time UINT Defines minimum time between new data production.
Table 38 - Connection Object Instance Attributes
Attr ID
Access Rule
Name Data Type Description
Table 39 - Connection Object Services
Service Code
Class/Instance Usage Name
05
h
Instance Reset
0E
h
Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
Table 40 - Discrete Input Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
1 Get Revision UINT Version of the implemented
object. 2