Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 113)

Rockwell Automation Publication 1440-UM001C-EN-P - May 2014 113
Status Indicators Appendix A
Tachometer Status Indicators The following table describes the tachometer indicator.
Setpoint Multiplier Indicator The following table describes the setpoint multiplier indicator.
State Probable Cause
Off • Normal operation within alarm limits on the channel.
• No power applied to the module. Look at Module Status indicator.
Solid Yellow An alarm on Speed or Acceleration is in Alert.
Solid Red An alarm on Speed or Acceleration is in Danger.
Flashing Yellow A tachometer fault other than a transducer fault (for example, no pulse
received).
Flashing Red The tachometer signal DC bias is not within the DC Low and High Limits.
State Probable Cause
Off The Alarm Limit Multiplier is not in effect.
Solid Yellow The Alarm Limit Multiplier is in effect.