Metrohm 730 Sample Changer - Manuel (Page 145)

4.10 Remote Control Commands
730 Sample Changer, Detailed Description
142
&Config …
4.10.2.14 C onfig.Aux.Language english , deutsch, français, español
C onfig.Aux.Contrast 0…3…7
C onfig.Aux.Beeper ON , OFF
C onfig.Aux.DevName 8 ASCII characters
C onfig.Aux.Prog read only
C onfig.Aux.MaxLift 0...235...325 mm
C onfig.Aux.Pumps1 0, 1, 2
C onfig.Aux.Pumps2 0, 1, 2
C onfig.Aux.SwingH on, off
C onfig.Aux.MonBeak on , off
Basic configuration / miscellaneous
Language:
Selection of dialog language
Contrast: Display contrast in steps from 0 to 15
Beeper: Acoustic warning signal on/off
DevName: Instrument name as identification for connections
with other instruments (8 ASCII characters, no spe-
cial characters)
Prog: Program version ($Q sends "730.0013")
MaxLift: Max. Lift height i.e. lowest possible lift position ∗
Pumps1: Numbers of pumps on tower 1 ∗
Pumps2: Numbers of pumps on tower 2 ∗
SwingH: Swing Head on/off ∗
MonBeak: Beaker Sensor on/off ∗
∗ Modifications effect after RESET or power on.
4.10.2.15 C onfig.RackDef.RackNo 1 ...16
Rack number
4.10.2.16 C onfig.RackDef.Code 000001 b...111111b
C onfig.RackDef.Type 8 characters
C onfig.RackDef.WorkH 0 ...325 mm
C onfig.RackDef.RinseH 0 ...325 mm
C onfig.RackDef.ShiftH 0 ...325 mm
C onfig.RackDef.SpecialH 0 ...325 mm
Rack definitions. Depending on the current rack number (see
4.10.2.15) the corresponding one of the 16 possible data sets is
overlayed.
Code:
Identification code of the rack, has to be unique.
Type: Rack type. Valid entries are the names of the posi-
tion tables, see 4.10.2.19.
WorkH: Working position of the lift in mm from the upper
stop of the tower.
RinseH: Rinsing position of the lift in mm from the upper stop
of the tower.
ShiftH: Shifting position of the lift in mm from the upper
stop of the tower.
SpecialH: Special position of the lift in mm from the upper stop
of the tower.