Metrohm 730 Sample Changer - Manuel (Page 132)

4.9 Operation via RS232 Interface
730 Sample Changer, Detailed Description
129
Program-specific Messages:
E28 Wrong object call
E29 Wrong value or no value allowed
E30 Wrong trigger
RS Receive Errors:
E36 Parity error
Exit: <QUIT> and set the same parity for both instruments.
E37 Stop bit error
Exit: <QUIT>and set the same stop bit for both instruments.
E38 Overrun error. At least 1 character could not be read.
Exit: <QUIT>.
E39 Internal receive buffer full (>82 characters).
Exit: <QUIT>.
RS Send Errors:
E40 DSR=OFF. No proper handshake for more than 1s. Exit: <QUIT>.
Is the receiver switched on and ready to receive?
E41 DCD=ON. No proper handshake for more than 1s. Exit: <QUIT>.
Is the receiver switched on and ready to receive?
E42 CTS=OFF. No proper handshake for more than 1s. Exit: <QUIT>.
Is the receiver switched on and ready to receive?
E43 Transmission has been interrupted for at least 3 s with XOFF.
Exit: send XON or <QUIT>.
E44 The RS-interface parameters are no longer identical for both in-
struments. Re-set.
E45 The receive buffer of the Sample Changer contains an incomplete
command (LF missing). Transmission is therefore blocked.
Exit: send LF or <QUIT>.
E50…E59 I/O-Test error
E60…E82 RS232-Test error
Instrument-specific Errors:
E201 Sample changer function error
E202 Dosimat function error