DCS Series 7 Liberty Collection 30 Inch Built-In Gas Grill Installation and User Guide - Manuel (Page 21)

19
STEP 1
Place the tank restraint in the island (Fig. 25).
STEP 2
Locate the tank restraint in the island within the recommended area
(Fig. 24 and 26).
STEP 3
Once located, secure to the bottom of the island using all eight hole
locations provided on the restraint. Wood screws can be used for
wooden floors or 1/4 inch diameter anchor screws or bolts may be
used if the floor is concrete or masonry (Fig. 27).
STEP 4
When secure, place the LP cylinder into the tank restraint making
sure to seat the tank all the way down, securely affixing the tank in
the restraint (Fig. 28).
STEP 5
Attach the regulator hose assembly and operate the grill normally as
described in the Use and Care manual (Fig. 29).
INSTALLATION
GAS HOOK-UP
Fig. 25
Fig. 26
Fig. 27
Fig. 28 Fig. 29
EN