Ohaus I10 Indicator - Manuel (Page 49)

49
Unit/Mode
Indicators
Selecting a Weighing Unit Selecting a Weighing Unit Selecting a Weighing Unit Selecting a Weighing Unit Selecting a Weighing Unit
or Parts Counting or Parts Counting or Parts Counting or Parts Counting or Parts Counting
To select one of the available weighing
units for use, repeatedly press
until the desired indicator ap-
pears on the display.
If the desired indicator does not appear,
refer to
Unit Selection in Chapter 4.
Weighing Weighing Weighing Weighing Weighing
1. Select the desired weighing unit.
2. If necessary, press to obtain
a zero reading on the display.
3. Place the object(s) to be weighed
on the load receiver.
4. Read the weight on the display.
Taring Taring Taring Taring Taring
When weighing material or objects that
must be held in a container, taring en-
ables the indicator to save the container’s
weight in memory, and subtract it from
the gross weight on the load receiver.
1. Press to obtain a zero read-
ing on the display.
2. Place an empty container on the
load receiver and read its weight on
the display. Notice that the GROSS
indicator is ON.
Weighing, Parts Counting and Printing 6 6 6 6 6