Setup mode and the, 10 menu structure – Ohaus I10 Indicator Manuel d'utilisation
Page 18
18
Setup Mode and the
Setup Mode and the
Setup Mode and the
Setup Mode and the
Setup Mode and the
I
II
II
10
10
10
10
10
Menu Structure
Menu Structure
Menu Structure
Menu Structure
Menu Structure
Programmable features of the
I
10 are
contained in “menus” which are accessed
in the Setup mode. The chart on page
2-3 shows how these menus are struc-
tured.
To access the Setup mode:
To access the Setup mode:
To access the Setup mode:
To access the Setup mode:
To access the Setup mode:
Switch 2 on the rear panel must be in the
ON position.
press and hold
until “SEtUP” is
displayed, then release it.
To access a menu:
To access a menu:
To access a menu:
To access a menu:
To access a menu:
or the
proper front panel button to press for the
menu you wish to access. Chapters 3, 4
and 5 contain information on using each
of the menus shown in the chart.
Initial Setup
Initial Setup
Initial Setup
Initial Setup
Initial Setup
For initial setup of the
I
10, you must go
through the Program Constants menu
and Calibration. All other menus are
optional.
Locking Out Setup Mode
Locking Out Setup Mode
Locking Out Setup Mode
Locking Out Setup Mode
Locking Out Setup Mode
When you are finished with the Setup
mode, Switch 2 can be set to OFF to
prevent unauthorized programming or
calibration.
Switch shown in
ON position.
Setup Mode
2
2
2
2
2