Ohaus I10 Indicator - Manuel (Page 39)

39
Auto Shut-Off Timer and Auto Shut-Off Timer and Auto Shut-Off Timer and Auto Shut-Off Timer and Auto Shut-Off Timer and
RS232 Parameters RS232 Parameters RS232 Parameters RS232 Parameters RS232 Parameters
The automatic shut-off timer can be en-
abled to turn the
I 10 off if it is idle for a
specified period of time. Being idle means
no switch depressions, weight changes
or RS232 input.
The RS232 parameters enable you to
configure the RS232 interface for com-
munication with other devices such as
printers, computers, etc.
To view or change these parameters:
1. Press and hold to access the
Setup mode.
Release when “SEtUP” is
displayed.
2. Press to access the Auto
Shut-off/RS232 parameters.
AUTO SHUT-OFF TIMER AUTO SHUT-OFF TIMER AUTO SHUT-OFF TIMER AUTO SHUT-OFF TIMER AUTO SHUT-OFF TIMER
3. When is released,
the words “Shut” then “OFF” will be
briefly displayed, followed by the
current timer setting.
The timer may be set to one of the
selections in the adjacent table.
A_On disables auto shut-off;
I 10 will remain on
OFF-2 I 10 turns off after 2 minutes
OFF-5 I 10 turns off after 5 minutes
OFF-9 I 10 turns off after 9 minutes
Setting Program Options 4 4 4 4 4