Ohaus I10 Indicator - Manuel (Page 13)

13
SWITCH SWITCH SWITCH SWITCH SWITCH FUNCTION FUNCTION FUNCTION FUNCTION FUNCTION
NUMBER NUMBER NUMBER NUMBER NUMBER POSITION POSITION POSITION POSITION POSITION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
1 Not Legal For Trade Applications:
ON 3 Point Linearization
OFF 2 Point Calibration
Legal For Trade Applications:
No function
2 ON Enables access to SETUP and CALIBRA-
TION from the front panel or RS232 interface.
OFF Disables access to SETUP and CALIBRA-
TION.
3 ON Memory Mode Enabled Memory Mode Enabled Memory Mode Enabled Memory Mode Enabled Memory Mode Enabled: Current ZERO and
TARE data are retained in memory when
I 10
is turned off. When turned back on, ZERO
and TARE data are restored and current
GROSS weight is displayed. This feature
prevents loss of weight data if the
I 10 is
accidentally shut off, as in hopper scale
application. This feature does NOT prevent
loss of weight data during a power loss unless
batteries are also installed.
OFF Memory Mode Disabled: At power off, all
current weight data is lost.
4 No function.
Internal Switch Functions Internal Switch Functions Internal Switch Functions Internal Switch Functions Internal Switch Functions
The internal switches which are accessed
from the rear panel have the functions
outlined in the following table:
Switch shown in
ON position.
Installation 1 1 1 1 1