Ohaus I10 Indicator - Manuel (Page 35)

35
If you turn Custom Units or Parts Count-
ing ON, refer to the following sections
before proceeding.
If they are turned off;
press when “SEtUP” is dis-
played to return to the weighing
mode, or proceed to another pro-
gram option.
Custom Units Custom Units Custom Units Custom Units Custom Units
If Custom Units is turned ON, you must
program the custom unit before you can
turn Parts Counting ON or OFF.
☞
Appendix 1 provides additional in-
formation on custom units includ-
ing the conversion factors for sev-
eral commonly used weighing
units.
To program a custom unit, it must first be
defined in terms of the calibration unit:
1 Custom Unit = Conv. Factor x Cal.
Unit
Example 1 - Example 1 - Example 1 - Example 1 - Example 1 - You wish to display weight
in grams and the
I 10 is calibrated in
kilograms:
1 gram = .001 kilograms
Conversion Factor = 00.001
Example 2 - Example 2 - Example 2 - Example 2 - Example 2 - You wish to display weight
in tons and the
I 10 is calibrated in
pounds:
1 ton = 2,000 pounds
Conversion Factor = 2000.0
Once you determine your custom unit
conversion factor, use the following pro-
cedure to program it.
Setting Program Options 4 4 4 4 4