Ohaus I10 Indicator - Manuel (Page 33)

33
Averaging Level Averaging Level Averaging Level Averaging Level Averaging Level
Averaging level compensates for vibra-
tion or excessive air currents on the load
receiver. During operation, the indicator
continually takes weight readings from
the load cell. Successive readings are
then digitally processed to achieve a
stabilized display. Using this feature,
you specify how much processing you
need.
Select one of four averaging levels using
the adjacent table as a guide.
☞
This feature does not affect the
accuracy of the unit.
To view or change the averaging level:
1. Press and hold to access the
Setup mode.
Release when “SEtUP” is
displayed.
2. Press to access Averaging
Level. The current Averaging Level
setting will be displayed.
3. Repeatedly press until the
desired setting is displayed.
4. Press to accept the dis-
played setting and return to the
Setup mode.
To return to the weighing mode, press
when “SEtUP” is displayed, or
proceed to another program option.
A.L. 0 reduced stability;
display will update every
200 milliseconds
A.L. 1 normal stability;
display will update every
200 milliseconds
A.L. 2 increased stability;
display will update every
400 milliseconds
A.L. 3 maximum stability;
display will update every
800 milliseconds
Setting Program Options 4 4 4 4 4