Tuner section (hst-h17s0), Section tuner (hst-h17s0), Amplifier section (hst-h17s0) – Sony MHC-1750 Manuel d'utilisation
Page 38: Section amplificateur (hst-h17s0), Section platlne-cassette (hst-h1750), Cassette deck section (hst-h1750), Specifications spécifications
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Specifications
Spécifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads both
channels driven, from 80 —
20,000 Hz; rated 16 watts per
channel minimum RMS power,
with no more than 1 % total
harmonic distortion from 250
milliwatts to rated output.
Tuner Section (HST-H17S0)_______________
Section tuner (HST-H17S0)
Système
Tuner superhëtèrodyne AM,
FM stéréo
Section tuner FM
Plage d’accord
Bornes d’antenne
Fréquence intermédiaire
10,7 MHz
Section tuner AM
Plage d’accord
87.5 —108 MHz
75 ohms asymétrique
System
FM stereo. AM
superheterodyne tuner
87.5 —108 MHz
75 ohms unbalanced
FM tuner section
Tuning range
Antenna terminals
Intermediate frequency
to
7 MHz
AM tuner section
Tuning range
530 — 1,710 kHz
(with the AM tuning interval
set at 10 kHz)
531 — 1.710 kHz
(with the AM tuning interval
at 9 kHz)
Antenna
AM loop antenna.
External antenna terminals
Intermediate frequency
450 kHz
Amplifier Section (HST-H17S0)____________
Continuous RMS power output
20 -f 20 waits (6 ohms at
1 kHz. 5% THO)
16 1-16 waits (6 ohms at
80 Hz —20 kHz, 1% THO)
Inputs
VIDEO (phono jacks):
sensitivity 450 mV.
impedance 47 kilohms
Outputs
HEADPHONES
(stereo minijack):
accepts headphones of
8 ohms or more
SPEAKERS:
accepts speakers of 6 to
16 ohms
530 — 1 710 kHz
(Intervalle d’accord AM
10 kHz)
531 — 1710 kHz
(Intervalle d’accord AM
9 kHz)
Antenne
Antenne cadre AM,
Bornes d’antenne extérieure
Fréquence intermédiaire
450 kHz
Section amplificateur (HST-H17S0)
Puissance de sortie efficace en continu
20 20 watts (6 ohms à
1 kHz. OHT 5%)
16 + 16 watts (6 ohms à
80Hz —20 kHz. DHT 1%)
Entrées
VIDEO (prises Cinch):
sensibilité 450 mV.
impédance 47 kilohms
Sorties
HEADPHONES
(Jack stéréo):
accepte les casques de
8 ohms et plus
SPEAKERS:
accepte les haut-parleurs
de 6 à 16 ohms
Section platlne-cassette (HST-H1750)
Système d’enregistrement
4 pistes. 2 canaux stéréo
Réponse en fréquence (Circuit Dolby coupé)
40 — 13 000 Hz (±3 dB).
avec cassette TYPE I
(Sony HF-S)
40 — 14 000 Hz (±3 dB).
avec cassette TYPE II
Pleurage et scintillement
0.1% efficace iO.3% (DIN)
Cassette Deck Section (HST-H1750)
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
40 — 13.000 Hz (±3 dB).
using TYPE I cassette
(Sony HF-S)
40 — 14.000 Hz (±3 dB).
using TYPE II cassette
Wow and flutter 01% WRMS ±0.3% (DIN)
38