Dacor Transitional 48 Inch Gas Smart Rangetop Installation Guide - Manuel (Page 28)

Installation Instructions
English 28
Verifying Burner Function
After the cooktop is fully installed and plugged in, make sure all burners work properly.
1. Push-turn a burner knob to the Lite. (A “clicking”
sound means the electronic ignition system is
functional. The burner ignites about 4 seconds
later, after air is purged from the line.)
2. After ignition, turn the knob to a setting.(The
“clicking” stops; flame height lowers as you turn
the knob coun-terclockwise.)
3. Perform this procedure for each burner.
INSTALL_TOP_DTT48T960_DG68-01476A-00_EN+MES+CFR.indb 28 INSTALL_TOP_DTT48T960_DG68-01476A-00_EN+MES+CFR.indb 28 2022-08-26 오후 8:23:27 2022-08-26 오후 8:23:27