12 - replacing an oven light, Warning – Fulgor Milano Sofia Series 48 Inch Freestanding Professional Gas Range Use and Care Manual Manuel d'utilisation

Page 25

Advertising
background image

EN

21

12 - Replacing an Oven Light

• Each oven is equipped with three halogen lights located in

the lateral walls of the oven.

• The lights are switched on when the door is opened or

when the oven is in a cooking cycle.

• Each light assembly consists of a removable lens, a light

bulb as well as a light socket housing that is fixed in place.

See figure on this page.

• Light bulb replacement is considered to be a routine

maintenance item.

To Replace a Light Bulb

1. Read WARNING on this page.

2. Turn off power at the main power supply (fuse or breaker

box).

3. Remove the lens between screw and glass using a screw

driver.

4. Remove the light bulb from its socket by pulling it.

5. Replace the bulb with a new one. Avoid touching the bulb

with fingers, as oils from hands can damage the bulb when

it becomes hot.

6. The bulb is halogen: use one with the same type checking

Voltage and Wattage.

7. Place the lens back on.

8. Replace the rack supports if provided is provided with the

oven model.

Turn power back on at the main power supply (fuse or breaker

box).

WARNING

• Make sure the oven and lights are cool and power to

the oven has been turned off before replacing the light

bulb(s). Failure to do so could result in electrical shock

or burns.

• The lenses must be in place when using the oven.

• The lenses serve to protect the light bulb from breaking.

• The lenses are made of glass. Handle carefully to avoid

breakage. Broken glass could cause an injury.

OVEN LIGHT

Advertising