Metrohm 799 GPT Titrino - Manuel (Page 167)

3.2 Remote control commands
799 GPT Titrino
163
Baud rates >9600 need a PC which is equipped accordingly (e.g. with 16550
component).
The setting of the values must be initiated with $G immediately after entry of
the values.
3.2.2.109. Config.ComVar.C30
with up to .C39, etc. 0... +999 999
Values of the common variables from C30 up to C39. Insert the common
variables directly or describe the determination results directly from the
method, see 3.2.2.7
3.2.2.110. Config.DosPrep.PowerOnPrep ON, OFF
Warning after power on, that the preparation of the buret has to be executed.
3.2.2.111. Config.DosPrep.Report ON, OFF
Report output after preparation of burets.
3.2.2.112. Config.DosPrep.Select internal D0, external D1, external D2
Selection of buret.
3.2.2.113. Config.DosPrep.DX.WarnInterval 5...9999, OFF
Time interval in min for automatic warning that a preparation has to be exe-
cuted.
3.2.2.114. Config.DosPrep.DX(.Dosimat).V 0...3.5...99999.99
Volume in ml, which will be expelled at the preparation. Start of sequence see
3.2.2.152.
3.2.2.115. Config.DosPrep.DX(.Dosimat).Repeat 1...2...9
Number of cycles for expelling the volume at the preparation. Start of se-
quence see 3.2.2.152.
3.2.2.116. Config.DosPrep.DX(.Dosimat).DosRate 0.01...150, max.
Config.DosPrep.DX(.Dosimat).FillRate 0.01...150, max.
Dosing and filling rate in ml/in for the preparation. Start of sequence see
3.2.2.152.
3.2.2.117. Config.DosPrep.DX.Select Dosimat, Dosino
Selection of buret type. Start of sequence see 3.2.2.152.
3.2.2.118. Config.DosPrep.DX.Dosino.Outlet tip, flask
Place where the liquid of the preparation is expelled. Start of sequence see
3.2.2.152.