Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manuel (Page 128)

128 Publication ICM-UM002F-EN-E - March 2013
Appendix B CIP Objects
Channel Object
(Class ID 31F
H
)
The Channel Object models front-end processing performed on an input
signal before specific measurements are performed. This processing typically
includes gain, filtering, and/or integration.
Channel Attributes
The Channel Object provides no class attributes.
Instances
There are 2 instances of this object.
Instance Attributes
Table B.29 Channel Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
3 Get/Set Output Data
Units ENGUNIT The data units of the
signal resulting from the
signal processing
performed in the channel. See DeviceNet Specification
Volume 1 Appendix K. Also see
Parameter Object Instances 3
and 4.
Valid values:
g = 1504
h
in/sec = 2B07
h
mil = 0800
h
psi = 1300
h
volt = 2D00
h
mm/s = 0900
h
µm = 2204
h
Pa = 1309
h
mbar = 1308
h
This setting is directly related to
the
Sensitivity Units of the
associated transducer and the
Level of Integration performed
on the channel.
4 Get Integration Level
of Integration
USINT The level of integration to
perform on the signal. 0 = None
1 = Single
2 = Double