Installation requirements, Tools and parts, Important safety instructions – haier 24 Inch Over-the-Range Microwave Installation Guide Manuel d'utilisation

Page 5: Read and save these instructions

Advertising
background image

IMPORTANT SAFETY

INSTRUCTIONS

Disconnect electrical power at the fuse box or circuit breaker box

before installing.

The mounting surface must be capable of supporting the cabinet

load, in addition to the added weight of this 63–85 pound (28.5–

38.5 kg) product, plus additional oven loads of up to 50 pounds

(22.7 kg) or a total weight of 113–135 pounds (51.3–61.2 kg).

This product cannot be installed in cabinet arrangements such as an

island or a peninsula. It must be mounted to BOTH a top cabinet AND

a wall.

Use two or more people to move and install microwave oven.

READ AND SAVE THESE

INSTRUCTIONS

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools and parts before starting installation. Read and follow the

instructions provided with any tools listed here.

TOOLS NEEDED

Phillips Screwdriver

Pencil

Tape Measure or Ruler

Carpenter's Square

Tin Snips (for cutting damper, if

required)

Scissors

Cordless Electric Drill

³⁄₁₆", ½" and ⅝" Drill Bits

Reciprocating Saw, Hole Saw or

Keyhole Saw

Stud Finder

Hammer

Carpenter's Level

Duct Tape

Masking Tape

Safety Gloves and Goggles

PARTS SUPPLIED

Wood Screws (¹⁄₄" x 2")

Toggle Bolts and wing

nuts (³⁄₁₆" x 3")

Grease Filters (packed

separately)

3

ENGLISH

Advertising