Analog Way Smart Fade - SMF251A - Manuel (Page 11)

SMART FADE™ Chapter 4 : STARTING
PAGE 11
4-4. RGB/S & COMPONENT INPUT
c RGB/S VIDEO SIGNAL
The RGB/S signal, also called RGB Sync., is an RGB signal with COMPOSITE Sync. This signal is widely used in
broadcasting and is available on European DVD players and Satellite receivers. The RGB/S signal is transmitted with 4
coaxial cables, and it has a better picture quality than COMPOSITE or S.VIDEO signals. The RGB/S connectors are
usually BNC connectors for Broadcasting equipment, and SCART connectors for DVD players and Satellite Receivers.
CONNECTION
d COMPONENT VIDEO SIGNAL (Y, R-Y, B-Y)
The Component Video signal, also called YUV (Y, R-Y, B-Y), or BETACAM
™ , is widely used in broadcasting and is
available on high-quality DVD players. The COMPONENT signal is transmitted with 3 coaxial cables, and also has a
better picture quality than COMPOSITE and S.VIDEO signals. The COMPONENT connectors are usually RCA (x3), or
BNC (x3) connectors.
CONNECTION
4-5. COMPUTER INPUTS
The SMART FADE ™ is provided with two COMPUTER inputs: COMPUTER 1 (in rear panel) and COMPUTER 2 (in
front panel). These inputs are used to pass-through any COMPUTER signals. In SEAMLESS mode, the signal connected to
one of the 2 inputs is used as the "reference". Then each video input will be scale to the same referenced format before to
be displayed onto the output.