Tweco 7-3478 - Manuel (Page 3)

July 7, 2003 / 7 Juilliet, 2003 3 Manual / Manuel 0-2953
17. For installations using the ATC Adapter , align the torch leads male connector with the ATC Adapter female
receptacle. Push the male connector into the female receptacle. The connectors should push together with a
very small amount of pressure. Secure the connection by turning the locking nut clockwise until it stops. DO
NOT use the locking nut to pull the connection together. Do not use tools to secure the connection.
A-03627
1
2
ATC Male
Connector
ATC Adapter
Female Receptacle
Torch Leads
To
Power Supply
Torch Connection - Torch Leads with ATC Male Connector, Power Supply with ATC Adapter
18. Check the torch for proper consumable parts.
CAUTION
The torch parts must correspond with the type of operation. Refer to the Torch Manual for details.
19. Connect primary input power. Turn on the gas supply.
20. Set proper gas pressure and flow per the Torch Instruction Manual.
21. Test the system for proper operation.