Tweco 7-3472 - Manuel

Date: February 28, 2003 / 28 Février, 2003 1 Manual/Manuel 0-2925
General Information
The Shielded ATC Adapter Kit (Female Receptacle) connects the shielded ATC Style RPT Torch to a plasma power
supply. This kit connects to a Torch Adapter Kit which is required to complete the installation.
Power Supply Torch Adapter
Kit
Shielded ATC
Adapter Kit (Female)
Catalog #7-3472
RPT Torch
With
ATC Connector
A-03418
Typical ATC System Block Diagram
Manual 0-2925
Shielded ATC Adapter Kit
(Female Receptacle)
Catalog # 7-3472
Installation Instructions
Parts Supplied
This kit includes:
• Shielded ATC Adapter
• Instructions
Installation
Install the Shielded ATC Adapter Kit as follows:
1. Turn OFF the power supply.
2. Disconnect the main input power to the power supply.
3. Remove the existing torch from the power supply, remov-
ing covers as required.
4. Install the Torch Adapter Kit, sold separately, for the type
of power supply, per instructions supplied with the Torch
Adapter Kit.
5. For Power Supplies on which a Strain Relief was used on
the existing Torch Lead, remove the old Strain Relief and
install on the ATC Adapter per the following:
a. Remove the retaining nut from the Strain Relief.
b. Loosen the leads capture nut that secures the Strain
Relief to the Torch Leads.
c. Remove the Strain Relief from the Torch Leads.
d. Install the Strain Relief onto the ATC Adapter Lead.
6. Feed the ATC Adapter Lead ends and the Strain Relief into
the hole in the unit.
7. Secure the Strain Relief to the Power Supply with the re-
taining nut removed earlier, see WARNING.
© 2002 Thermal Dynamics Corp., Printed in USA
NOTE
For Mechanized Systems refer to the Torch Con-
trol Cable Wiring Diagrams in the Manual sup-
plied with the RPT Torch.
WARNING
If a Strain Relief is not used on the ATC Adapter,
then the panel hole where the ATC Adapter en-
ters the power supply should be adequately pro-
tected to prevent damage of the ATC Adapter
Lead caused by rubbing on the edge of the hole.
82 Benning Street, West Lebanon, NH 03784 USA
(603) 298-5711 • www.thermal-dynamics.com