LG Mega 12,000 BTU Single Zone Mini Split Air Conditioning Unit Owner's Manual Manuel d'utilisation

Page 33

Advertising
background image

33

TROUBLESHOOTING

ENGLISH

Problem

Possible Causes

Corrective Action

The indoor unit is

still operating even

when the unit has

been turned off.

The Auto Clean function is

being operated.

Allow the Auto Clean function to continue since

it removes any remaining moisture inside the

indoor unit. If you do not want this feature, you

can turn the unit off.

The air outlet on

the indoor unit is

discharging mist.

The cooled air from the air

conditioner makes mist.

When the room temperature decreases, this

phenomenon will disappear.

Water leaks from the

outdoor unit.

In the heating operations,

condensed water drops from

the heat exchanger.

This symptom requires installing a drain hose

under the base pan. Contact the installer.

There is noise or

vibration.

A clicking sound can be

heard when the unit starts or

stops due to movement of the

reversing valve.

Creaking sound: The plastic

parts of the indoor unit creak

when they shrink or expand

due to sudden temperature

changes.

Flowing or Blowing sound:

This is the flow of refrigerant

through the air conditioner.

These are normal symptoms. The noise will

stop.

The indoor unit gives

off an odor.

Odors (such as cigarette

smoke) may be absorbed into

the indoor unit and discharged

with airflow.

If the smell does not disappear, you need to

wash the filter. If this does not work, contact the

service center to clean your heat exchanger.

The air conditioner

does not emit warm

air.

When Heating Mode starts, the

vane is almost closed, and no

air comes out, even though

the outdoor unit is operating.

This symptom is normal. Please wait until the

unit has generated enough warm air to blow

through the indoor unit.

The outdoor unit is in

Defrosting Mode.

In Heating Mode, ice/frost is built up on the

coils when the outside temperature falls.

This function removes a layer of frost on the

coil, and it should finish in approximately 15

minutes.

Outside temperature is too

low.

The heating effect may not be sufficient.

Advertising