LG Mega 12,000 BTU Single Zone Mini Split Air Conditioning Unit Owner's Manual - Manuel (Page 23)

23 OPERATION
ENGLISH Using the Low Heating Function
This function operates the heating system to maintain
a minimum room temperature and prevent objects in
the room from freezing where there is no permanent
resident, such as a vacation.
• , are displayed on the display screen.
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons such
as , , MODE , FAN SPEED , and then return
to Heating Mode, 30 °C high speed.
• If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only for
power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• COMFORT AIR and
SWING
button cannot be used
while the LH function is in operation.
Using the Mosquito Away Function
This function fans away mosquitos by generating a
high-frequency wave.
• is displayed on the display screen.
NOTE
• You can use this function without turning the air
conditioner on.
• is displayed on some indoor units.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode, moisture
is generated inside the indoor unit. This function
removes such moisture.
• is displayed on the display screen.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run for
30 minutes and cleans the inside of the indoor unit.
Using the Comfort Sleep Function
This function operates the air conditioner
automatically to make the comfortable sleep
environment.
• , are displayed on the display screen.
NOTE
• This function is available with Cooling Mode.
• The vane stops swing and sets indirect airflow
angle, after 30 minutes from start even though
the room temperature doesn’t decrease to optimal
temperature to sleep.
• It is possible that a comfortable sleep environment
is different according to the people.