Hamilton Beach 70300 - Manuel (Page 6)

8 4 0 0 6 o 2 0 0 E v 0 3 . q x d 1 / l i / O O 4 : 5 2 ? M P a g e ^
Continuous Processing
IMPORTANT: When using the
continuous feed chute the food gate
must be removed and the continuous
feed disc must be in place.
1. Make sure the Control Switch is
turned to OFF (O) and the unit is
unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 4.)
3. Place disk shaft onto center column,
select desired side of Continuous
Feed Disc and place onto disc shaft.
The Continuous Feed Disc has a
ribbed side to use for cabbage and
leafy greens, and a flat side to use
with other foods.
4. Select desired side of Reversible
Slicer/Shredder Disc and place that
side up, on disc shaft.
5. REMOVE FOOD GATE FROM
CONTINUOUS FEED COVER TO
PREVENT DAMAGE TO UNIT.
6. Lock on cover. (See “How to Lock
the Cover” on page 4.)
7. Plug in unit and select speed.
Process food. Check the Continuous
Feed Chute frequently to make sure
the opening is not blocked. If
blocked, turn unit off and unplug.
Clear blockage, then reassemble and
continue processing.
NOTE: When using the Continuous Feed
Chute, some food may fall into the food
processor bowl.