Connecting to a tv, Selecting the output sound – Philips DVD835AT Manuel d'utilisation
Page 101
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Connections J
For details of output sound, see
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Selecting the output sound
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch.” [
Signal flow
cable.
' Set your TV to accept
Auxiliary (Line) input.
See your TV owner’s
manual for details.
lotesi
■ Refer to the owner’s manual of the connected TV as well.
' When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
' If your television set has one audio input jack, use a Y cable adapter (not supplied) to connect to your TV.
' Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TVA/CR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel
using a stereo plug.
Before connecting, temporarily turn down the volume with
the LEVEL volume control. Readjust to your preference
when playback begins.
Maximum
12