Specifications, Audio section, Harmonic distortion – Sony TA-E9000ES Manuel d'utilisation
Page 43: Frequency response, Signal-to-noise ratio, Decodable digital formats
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Specifications
Audio section
Harmonic distortion
Less than 0.05'’o (witli
sound field, and
equalizer bypassed)
Frequency response
PHONO:
20 Hz ~ 20 kHz
RIAA ±0.5 dB
LINE (TUNER, CD,
MD/DAT,TAPE,
TV (TV/DBS), DVD,
LD, VIDEO 1,2, and
VIDEO 3):
20 Hz ~ 20 kHz
+0/-0.2 dB (with
sound field, and
equalizer bypassed)
Signal-to-noise ratio
DIGITAL IN: 100 dB
(20 kHz LPF, A)
PHONO: 82 dB (A) »
LINE: 94 dB
(20 kHz LPF, A) ”
’ Measured at REC OUT
** 2.5 V input level
Inputs (Analog)
Inputs (Digital)
) Outputs (Analog)
MD/DAT, TAPE
PHONO:
(REC OUT); VIDEO
Sensiti\’itv: 5 inV
1,2,3 (REC OUT):
Impedance:
Voltage: 250 mV,
50 kilohms
Impedance:
LINE (TUNER, CD,
1 kilohm
MD/DAT, TAPE,
PREOUT (FRONT L/
TV (TV/DBS), DVD,
R, CENTER, REAR
LD, VIDEO 1, 2, and
L/R, WOOFER):
VIDEO 3):
Voltage: 1 V
Sensitivity; 250 mV
Impedance:
Impedance:
200 ohms
50 kilohms
PHONES:
I
DVD (coaxial): '
Accepts low- and
high-impedance
headphones
Sensitivity: 0.5 Vp-p
Impedance; 75 ohms
Outputs (Digital)
LD (AC-3 RF):
MD/DAT (Optical)
Impedance: 75 ohms
LD (coaxial):
Sampling Frequency
Sensitivity; 0.5 Vp-p
48 kHz
Impedance: 75 ohms
CD (coaxial):
EQ
BASS:
Sensitivity; 0.5 Vp-p
100 Hz - 1.0 kHz
Impedance: 75 ohms
(21 steps)
CD, MD/DAT, TV (TV/
MID:
DBS), LD (Optical)
99 Hz - 8.6 kHz
DVD (optical)
(41 steps)
TREBLE:
1.0 kHz - 10 kHz
(21 steps)
Gain levels:
±10 dB, 1 dB step
J»
a
Q.
5‘
3
SL
3
o
3
u
ft
o'
3
Decodable Digital Formats
Dolby Digital (AC-3),
MPEG, DTS,
Linear PCM
45
GB