Selecting a sound field, To turn the sound field off – Sony TA-E9000ES Manuel d'utilisation
Page 23
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Selecting a Sound Field
Notes
• Tho Ivor boloiiio. vvntor lo\ el, ond ivor lo\ ol oro shown in tlu-
dispLn during odjustniont.
• AlthiHigh tlu’so odjustnionts con olso ho niodo \ io tho front
ponol using tho poromotors in tlio LE\ EL monu (whon tho tost
tono is output, tho unit switchos to tho LliVEL moni*_
outonioticolly), wo rocommond \ on follow tho proceduro
doscribod obo\ o ond odjust tho spookor lo\ els from \ our
lisfoning posifion using tho romoto control.
9 When setting the volume levels for each speaker
Lot's ossumo thot \ ou ho\ e motchod tho sound lo\ ols of nil tho
spenkors using tho test tono. Although this lays the foundation
for high qualify surround sound, if may be necessary to make
further acijustments while listening to playback of actual
software. This is because most software contains center and rear
channels recorded at slightly lower levels than tho two front
channels.
When you actually playback software recorded in multi channel
surround you will notice that increasing the center and rear
speaker levels produces a better blend between the front and
center speakers and greater cohesion between the front and rear
speakers. Increasing the level of fhe center speaker about 1 dB,
and the rear speakers about 1~2 dB is likely to produce better
results.
In other words, in order to create a more cohesive soundstage
with balanced dialog, we recommend that you make some
adjustments while playing your software. Changes of only 1 dB
can make a huge difference in the character of the soundstage.
^'oll can enjiiv surround sound simplv b\ selecting one of
the pre-programmed sound fields according hi the
prograrn vou want to listeri to.
Press MODE ■•■/- repeatedly to select the sound
field you desire.
The current sound field is indicated in the display.
See the table starting on the following page for
information on each sound field.
To turn the sound field off
Press the 2ch or AUTO FORMAT button on the front panel.
For details, see page 26.
i
You can identify Dolby Surround-encoded software by
looking at the packaging
Use discs with the logo. In order to en|o\’ Dolbv Digital
(AC-3) playback you must use discs bearing this logo.
9 Sound signals with a sampling frequency of 96 kHz are
converted to signals with a sampling frequency of 48 kHz before
processing by the sound fields
When using the 2ch or AUTO FORMAT DECODING modes,
sound signals with a sampling frequency of 96 kHz are played
back without conversion.
9 You can enjoy surround sound while listening to headphones
The PHONES jack on this amplifier can present audio in Virtual
Surround. For details, see page 14.
rz
o'
«<
s'
(Q
1/1
C
s
c
3
a
1/1
o
c
3
a
23
GS