Sony TA-E9000ES - Manuel (Page 41)

Additional
Information
Troubleshooting
If vou oxporionce nny of fho follow ing (.fifficulties whilo
using tho control amplifier, use this troubleshooting guide
to help vou remed\' the problem. Also, see "Checking the
connections" on pnge 1-7 to \ erify th<it the connections are
correct. Should an\' problem persist, consult vour nearest
Sony dealer.
There's no sound or only a very low-level sound
is heard.
Check that all components are connected securely.
^ Make sure that you've selected the correct
component on the control amplifier.
^ Press MUTING on the remote if "MUTING"
appears in the display.
^ If headphones are connected, disconnect them.
>
The left and right sounds are unbalanced or
reversed.
^ Check that all components are connected correctly
and securely.
Severe hum or noise is heard.
Check that all components are connected securely.
^ Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 feet)
away from a TV set or fluorescent light.
Move your TV away from the audio components.
^ Make sure you've grounded SIGNAL GND ih
terminal.
The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
No sound is heard from the center speaker.
Make sure the sound field function is on (press
AUTO FORMAT).
^ Adjust the speaker volume (see page 22).
^ Make sure the center speaker size parameter is set
to either SMALL or LARGE (see page 18).
>
a
a
r*
o'
3
o
3
fil
r+
o'
3
43 GB