Tweco 7-3485 - Manuel (Page 3)

August 11, 2003 / 11 Août, 2003 3 Manual / Manuel 0-2994
17. Tighten the strain relief dome nut onto the strain
relief assembly. Check for a secure fit.
18. Use the wire ties included in this kit to secure the
torch wire leads and work cable to the leads as-
sembly
19. Reinstall the power supply cover per the power
supply manufacturer's instructions.
20. In installations using the ATC Adapter, connect
the torch ATC male connector to the ATC Adapter
receptacle. The connectors should push together
with a very small amount of pressure. Secure the
connection by turning the locking nut clockwise
until it stops. DO NOT use the locking nut to pull
the connection together.
A-03627
1
2
ATC Male
Connector
ATC Adapter
Female Receptacle
Torch Leads
To
Power Supply
Torch Connection - Torch with ATC Male
Connector, Power Supply with ATC Adapter
21. Check the torch for proper parts per the torch
manual.
22. Connect the power supply to primary input
power. Set gas pressure and flow per the torch
manual.
23. Test the torch for proper operation.
NOTE
Every effort has been made to provide com-
plete and accurate information in this manual.
However, the publisher does not assume and
hereby disclaims any liability to any party for
any loss or damage caused by errors or omis-
sions in this Manual, whether such errors re-
sult from negligence, accident, or any other
cause.