Doyon SRO2 - Manuel (Page 20)

FAM SROxG rev 07-13.doc 10/13
A-16
Programming a product recipe
Note : the control can hold up to 99 recipes. Each recipe can have up to 8 stages.
Rotate the dial to the desired recipe and press .
To edit a new or existing name:
Turn the dial to the edit name or option name and press .
-EDIT NAME: Use dial to select each letter and press to step to the next letter.
-OPTION NAME: Select one of the library listed product name.
After product name is edited, you will enter to the following recipe programming mode.
1-PREHEAT
If no preheat needed: Use the dial to step on next programming function.
If preheat needed: Turn the dial to select preheat and press .Use the dial to select YES and press .
Rotate the dial to set the desire preheat temperature and press to exit and save preheat function.
2-STAGE PROGRAMMING
Turn the dial to the product stage 1 and press . Display will show the following programming process.
a) Set stage timer: Turn the dial to select desired current stage cooking time and press . Note if core probe is set to
cooking the cook time function will be disabled and you will start with set temperature instead of set Time.
b) Set temperature: Turn the dial to set the current stage temperature and press .
c) Steam: If no steam is needed, press to skip steam function and go to FAN speed.
If steam is needed, rotate the dial to select YES and press . Use the dial to select SHOT or PULSE and
press . If SHOT is selected, rotate the dial to select LOW(+/- 0.67 us gallon/ 2.6 liters) or HIGH(+/- 1
Usgallon/4 liters) steam and press .
If after steam SHOT fan delay is needed, set the fan off delay time (0 to 3min) and press . If no fan delay
needed set the time to 00:00.
To exhaust excess of steam after steam process, add desired time (0 to 3min) to activate and press . I f no
need set the time to 00:00
If pulse is selected, rotate the dial to select STD(steam every 2 minutes), HI(steam every 1 minute) or
MED(steam every 1.5 minutes) pulse and press .
d) Fan delay: If no fan delay is needed, press of the dial to skip to fan cycle. If fan delay is needed, rotate the dial to
select LOW (1 minutes) or HIGH (3 minutes) and press . If a fan off delay is needed, press to step to
fan cycle.
e) Fan Speed: If fan speed STD is ok, press . If HIGH fan speed, is desired, Turn the dial to select HIGH and press
.
f) Vent opening : If Vent need to be open during the stage set desired time you want the vent open, exp: if after 15 min
baking you want vent open set 15:00min, vent will open after 15 min for the balance of the stage time. normally
use to exhaust excess of product vapor before end of baking process or prevent excess of vapor coming out
during opening door.
You have now completed 1 stage program. If another stage is needed, select stage 2 and follow same process as stage 1.
If a 2nd stage is not needed, turn the dial to exit and the recipe will be registered.