Ebake programmable control - operating modes – Doyon SRO2 Manuel d'utilisation

Page 16

Advertising
background image

FAM SROxG rev 07-13.doc

10/13

A-12

EBAKE PROGRAMMABLE CONTROL - OPERATING MODES


The Doyon Ebake controller has two operation modes Manual and Programmable.
MANUAL: to use all functions without using a recipe program.
PROGRAMMABLE : to use with a recipe program.

Program capacity

Program #1 is always used as the default Manual Cooking mode setting (single stage).

Programs #2 to #99 can have up to 8 stages each recipe.


OVEN START UP

Turn on the main power switch. The controller will power up and display:

OFF, PRESS POWER KEY TO START.

Press the red POWER key, the oven will go ON. The display will read PREHEAT and the oven will heat to reach the
MANUAL preset temperature. Then, the oven will display READY and the alarm will beep 5 times. This will mean that
the oven is at the desired temperature.

To turn the oven OFF, press the red POWER key and hold it for 3 seconds. The oven will run on COOL DOWN mode
until it reaches 250°F and then, it will automatically turn OFF. At this moment, the display will show : OFF, PRESS
POWER KEY TO START.


If the door is opened :

Display scrolls recipe NAME and DOOR OPEN.

All functions are turned OFF (unless in Cool Down mode, then the fan remains on).

All timers pause until the door is closed.

DOOR SWITCH

Advertising
Ce manuel est liée aux produits suivants: