Doyon SRO2 - Manuel (Page 17)

FAM SROxG rev 07-13.doc 10/13
A-13
MANUAL MODE
This mode is used to work in a single stage.
Turn the dial until MANUAL is highlighted, press the dial to confirm
.
For fast cool down, press on the COOL DOWN key, the fan will remain ON while the door is open.
Note : if the oven reaches 200°F, it will turn OFF automatically. Display will show : OFF, PRESS POWER KEY TO
START.
TEMPERATURE FUNCTION
To change the temperature set point, press on . Display will show actual temperature set point. Turn the dial to select
the desired temperature set point (by increments of 5 degrees) and press to confirm and exit the setting mode. Also,
note that the new set point will automatically be saved after exiting if the dial is not pressed after changing the setting. If
the dial is not pressed or turned within 3 seconds, the last set temperature will be saved.
TIMER FUNCTION
To change the time setting, press on
.
Display will show time setting. Turn the dial to select the desired timer setting
(by increments of 15 sec.) and press to confirm and exit setting. If the dial is not pressed or turned within 3 seconds,
the last set time will be saved.
Press on timer START/STOP key to start the timer countdown. At the end of the countdown, display will show BAKE
DONE. If needed, you can add 1 minute by pressing the ADD TIME key. It will automatically add 1 minute without
changing the original time setting. If more then one minutes is needed turn the dial to desired add time and press
When the countdown is finished, the display will show BAKE DONE.
Also, at any time during the countdown, the time can be paused by pressing on the TIMER START/STOP key or
cancelled by pressing and holding the START/STOP key for 3 seconds.
When the door is open, the timer pauses and the display indicates DOOR OPEN until the door is closed.
□ If the remaining time is less than 60 minutes, it will be displayed as MM:SS
□ If the remaining time is 60 minutes or more, it will be displayed as HH:MM
Note : Timer in MANUAL mode is only a reminder.
By pressing on the FAN OFF DELAY key, the fan remains OFF for a period of time before starting working in normal
fan mode. After pressing FAN OFF DELAY key, the display will show NONE. Turn the dial to select HIGH (3 minutes)
or LOW (2 minutes) fan off delay and press
.
If the dial is not pressed or turned within 3 seconds, the last set FAN
OFF DELAY will be saved.
To cancel fan off delay, press the FAN OFF DELAY key, turn the dial to NONE and press
Note : during FAN OFF DELAY the oven heating system is not functional. A higher set point temperature preheat is
recommended if use more then 3 minutes FAN OFF DELAY.
COOL DOWN FUNCTION
FAN OFF DELAY FUNCTION