Ohaus I5S Indicator - Manuel (Page 29)

28
Retain Zero Data Retain Zero Data Retain Zero Data Retain Zero Data Retain Zero Data
Set this parameter to ON to save zero
data in permanent storage in case the
indicator is turned off or power is lost.
This feature is used primarily in hopper
and tank scale applications where loss
of weight data will have serious conse-
quences.
To access the current setting, press
when RETAIN is displayed.
1. To change the displayed setting,
press .
2. To accept the displayed setting,
press .
To exit the Retain Zero submenu and
store your settings, press to dis-
play END, then press to return to
the main menu.
To exit main menu and return to a weigh-
ing mode, repeatedly press until
END is displayed then press . The
scale is now in a weighing mode.
End/Store Settings End/Store Settings End/Store Settings End/Store Settings End/Store Settings
You must use END to exit store Scale
submenu settings. If you do not use END
to exit the submenu, settings you have
made will not be stored.
2 2 2 2 2 Setup and Calibration