Ohaus I5S Indicator - Manuel (Page 21)

20
Menu Lockout Switch Setting Menu Lockout Switch Setting Menu Lockout Switch Setting Menu Lockout Switch Setting Menu Lockout Switch Setting
The menu lock-out switch must be in the
OFF position to change settings in this
menu. This menu specifies which sub-
menus will be locked out when the menu
lockout switch is enabled. An ON setting
locks out the selected menus. To access
the current settings (ON or OFF), press
when LOCSW is displayed.
NOTE NOTE NOTE NOTE NOTE: When Legal for Trade is set ON,
you are required to lock the Setup and Cal
menus.
1. The first submenu -SETUP- will be
displayed.
2. Press to access the current
setting.
3. To change the displayed setting,
press .
4. To accept the displayed setting, press
. To proceed to the next
submenu, press .
Set each submenu in the same manner.
When END is displayed, press to
return to the Setup submenu.
To exit the Setup submenu and store your
settings, press to display END, then
press to return to the main menu.
To exit main menu and return to a weigh-
ing mode, repeatedly press until END
is displayed then press . The scale
is now in a weighing mode.
End/Store Settings End/Store Settings End/Store Settings End/Store Settings End/Store Settings
You must use END to exit store Setup
submenu settings. If you do not use END
to exit the submenu, settings you have
made will not be stored.
(when option is installed)
2 2 2 2 2 Setup and Calibration