MaxPower Corp Gamatronic Power+ M100 - Manuel (Page 64)

Gamatronic Electronic Industries Ltd.
56 POWER+ 3x208 V, User Guide, Release 2.1
# Message Explanation
16 BATFLT Batteries failed last test
17 USER-1 User 1 input open
18 USER-2 User 2 input open
19 USER-3 User 3 input open
20 AC-BRN Input ac supply Brown Out
21 ACIN_H Ac input excessive
22 ACFAIL Ac input failure
23 STSWCM Static Switch does not respond
24 SLFFLT Last controller self-test failed
25 BAT-CB Battery Circuit Breaker Open
26 CURSHR Current Sharing fault, load current is not equally divided between
modules
27 UPSOUT Fault (no current) in 1 or more output stage
28 UPSHDN UPS shutdown by EPO, Battery Discharge, ON/OFF pressed
29 OVLOAD Load current is high
30 UPS-CM One or more UPS’s not responding
31 STRTUP Startup time-stamp
32 ------ N.A.
Each message is formatted as follows:
Time – HH:MM:SS
Date – YY:MM:DD
Data – dc voltage between + and – terminals for all events except LOADBP and
STSW status for LOADBP events. (See below.)
Even start (IN) and end (OUT)
Description – (See Table 3 on page 55)
Event number – 0 through 255, 255 being the most recent
Example:
11:23:56 05.01.28 436 IN -> E.P.O. 254
This message means that at 11:23:56 on January 28 th 2005, Emergency Power Off
alarm was registered as event 254; dc voltage at the time was 436 V being a sum of
(V+ -N) and (V- -N).