Ohaus CD-11 Indicator Manual en - Manuel (Page 24)

24
4. OPERATION (Cont.)
4.9 Establishing a New Average
Piece Weight (APW) (Cont.)
• Press Zero/Menu button to accept current sample.
The new APW is established. Place parts on plat-
form or in a container to count. If a container is
used, be sure to tare the empty container first.
• Additional samples may be added to the platform as
long as the same sample weight intially entered is
used with the samples being weighed.
Pcs Gross
Brutto
Pcs Gross
Brutto
Pcs Gross
Brutto
Pcs Gross
Brutto
Stable
4.10 Returning to a Weighing Mode
• Press Print/Units button until the display indicates
the desired measuring unit either kg, lb or g.
Stable Gross Center
of zero
4.11 Returning to a Preset APW
If the APW has been calculated previously, the Indicator
stores the value in memory. Proceed as follows to use a
previously set APW:
• Press and hold Print/Units button until Pcs cursor
is displayed.
• Place samples on the platform. The display indicates
the number of pieces based on the previously en-
tered data. Sample shown at left indicates 100
pieces.
Stable Gross Center
of zero
Pcs
Pcs Gross
Brutto
Stable
CAUTION
WHEN POWER IS TURNED OFF, APW
WILL ALWAYS RETURN TO DEFAULT
APW 5.
CD-11 Indicator