Sun Microsystems 806-2989-10 - Manuel (Page 46)

26 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2001
Driver Parameter Values and Definitions
TABLE 4-1 describes the parameters and settings for the ce device driver.
TABLE 4-1 ce Driver Parameter, Status, and Descriptions
Parameter Status Description
instance Read and write Device instance
adv_autoneg_cap Read and write Operational mode parameter
adv_1000fdx_cap Read and write Operational mode parameter
adv_1000hdx_cap Read and write Operational mode parameter
adv_100T4_cap Read and write Operational mode parameter
adv_100fdx_cap Read and write Operational mode parameter
adv_100hdx_cap Read and write Operational mode parameter
adv_10fdx_cap Read and write Operational mode parameter
adv_10hdx_cap Read and write Operational mode parameter
adv_asmpause_cap Read and write Flow control parameter
adv_pause_cap Read and write Flow control parameter
link_master Read and write 1Gb forced mode parameter
use_int_xcvr Read and write
enable_ipg0 Read and write Enable additional delay before transmitting a packet
ipg0 Read and write Additional delay before transmitting a packet
ipg1 Read and write Interpacket Gap parameter
ipg2 Read and write Interpacket Gap parameter
rx_intr_pkts Read and write Receive interrupt blanking values
rx_intr_time Read and write Receive interrupt blanking values
red_dv4to6k Read and write Random early detection and packet drop vectors
red_dv6to8k Read and write Random early detection and packet drop vectors
red_dv8to10k Read and write Random early detection and packet drop vectors
red_dv10to12k Read and write Random early detection and packet drop vectors
tx_dma_weight Read and write PCI Interface parameter
rx_dma_weight Read and write PCI Interface parameter
infinit_burst Read and write PCI Interface parameter
disable_64bit Read and write PCI Interface parameter