Sun Microsystems 806-2989-10 - Manuel (Page 33)

Chapter 2 Installing the Adapter 13
2. View the device that you installed.
Using the previous example, type:
3. Set the Sun GigaSwift Ethernet device to be your default boot device, type:
Rebooting the System
After verifying the adapter installation, use the boot -r command to perform a
reconfiguration boot on your system.
ok cd /pci@1f,2000/pci@1/network@4
# setenv boot-device=/pci@1f,2000/pci@1/network@4
ok boot -r