Sun Microsystems 806-2989-10 - Manuel (Page 39)

Chapter 3 Network Configuration 19
3. Create an appropriate entry in the /etc/hosts file for each active ce interface.
For example:
Setting Up a Diskless Client System on a
GigaSwift Ethernet Network
Note – Setting up a diskless client over GigaSwift Ethernet adapter in VLAN
configuration is not supported. For setting up a diskless client, the switch port to
which the GigaSwift Ethernet adapter is connected must be in normal LAN mode.
Before you can boot and operate a diskless client system across a gigabit Ethernet
network, you must first install the GigaSwift Ethernet software packages into the
root directory of the diskless client. You can find the GigaSwift Ethernet software
packages on the Sun GigaSwift Ethernet Driver 1.0 CD. Refer to the Solaris Advanced
Installation Guide and the System Administration Guide for more information about
installing and administering diskless client systems.
Note – The Solaris 8 operating environment does not support diskless clients.
Solaris 8 Update 1/01 does support diskless clients. Refer to the Solaris Advanced
Installation Guide and the System Administration Guide for more information about
installing and administering diskless client systems.
# cat /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
129.144.10.57 zardoz loghost
129.144.11.83 zardoz-11