Viking 5 Series 1.5 cu. ft. Built-In Microwave Oven Install Guide - Manuel (Page 13)

13 E E E 13 E 13 E
Operation
13
• Before operating your new microwave oven make sure
you read and understand this Installation/Use and Care
Manual completely.
• Before the microwave oven can be used, follow these
procedures:
1. Plug in the microwave oven. Close the door. The
microwave oven display will show WELCOME PRESS
CLEAR AND PRESS CLOCK .
2. Touch the Stop/Clear pad. : will appear.
3. Set clock .
TO SET THE CLOCK
1. Touch Clock pad.
2. Enter the correct time of day by touching the numbers
in sequence. Touch Clock pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the display.
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show WELCOME PRESS CLEAR AND PRESS CLOCK after the
power is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also be
erased. Simply touch Stop/Clear pad and reset the
clock for the correct time of day.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the microwave oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
Before Operating
1.TINSEB564MRR0_VK-VMOC506_Conv MO U&C_E.indd 13 5/4/18 9:46 AM