Ppendix, Erial, Umber – Labconco Protecto PVC Laboratory Fume Hoods 14181 Series Manuel d'utilisation
Page 59: Escription
![background image](/manuals/738682/59/background.png)
Product Service 1-800-522-7658
55
Original instructions
A
PPENDIX
D
S
ERIAL
N
UMBER
T
AG
D
ESCRIPTION
Serial tag includes standard information with the following changes:
The portion of the tag for electrical information is labeled with the following
units: Volts AC, Phase, Cycle, AMP.
Each hood will include one of the following:
Volts AC
Phase
Cycle
AMP x
115
1
50/60
10X
115
1
50
10X
115
1
60
10X
230
1
50/60
5X
230
1
50
5X
230
1
60
5X
Where
may be a separate label indicating: Caution, See Manual.
The X above will be one of several possible alpha characters as defined in the
manual as follows:
X:
No additional duplexes on hood, noted amperage applies.
B:
This fume hood includes one additional electrical receptacle, individually
wired to the field wired box and individually rated as 115V, single phase,
60Hz, 20 Amps. Each duplex can be wired on a dedicated circuit rated at
20A or the duplexes may be ganged together on the same circuit with the
total load of the ganged duplexes not exceeding the 20A electrical service
they are wired to.
C:
This fume hood includes two additional electrical receptacles, individually
wired to the field wired box and individually rated as 115V, single phase,
60Hz, 20 Amps. Each duplex can be wired on a dedicated circuit rated at
20A or the duplexes may be ganged together on the same circuit with the
total load of the ganged duplexes not exceeding the 20A electrical service
they are wired to.
- Protecto PVC Laboratory Fume Hoods 14161 Series Protecto PVC Laboratory Fume Hoods 14151 Series Protecto PVC Laboratory Fume Hoods 14141 Series Protecto PVC Laboratory Fume Hoods 14081 Series Protecto PVC Laboratory Fume Hoods 14061 Series Protecto PVC Laboratory Fume Hoods 14051 Series Protecto PVC Laboratory Fume Hoods 14041 Series