Labconco Protecto PVC Laboratory Fume Hoods 14181 Series - Manuel (Page 44)

Chapter 7: Modifying the Protector PVC
Product Service 1-800-522-7658 40
Original instructions
Installing an Electrical Duplex Outlet
Your Protector Fume Hood can be ordered with duplex outlets, however, if you
ordered a model without an electrical duplex outlet you can have one installed in
the field by a qualified electrician. Contact Labconco Customer Service for
ordering information. (Not acceptable on explosion-proof hoods).
Votre Protège-capot de fumées peut être commandé avec prises doubles,
cependant, si vous avez commandé un modèle sans prise de courant duplex, vous
pouvez en faire installer sur le terrain par un électricien qualifié. Contactez le
service clientèle Labconco pour commander. (Non acceptable sur antidéflagrants
hottes).
Figure 7-2
Installing the Acid Vent Kit from the Acid
Cabinet
Order 3591101 Acid Vent Kit for PVC hoods to install from the Acid Cabinet
below to the top of the PVC Hood. Remove the plugged 2" connection and route
the tubing.
Installing Additional Washdown Valve
Order 9808310 Washdown Valve and follow the sizing guideline from Chapter 2.