Sony CMT-M11C - Manuel (Page 5)

[ Connect the speakers.
1 Connect the right speaker to the tuner
MD deck with the audio cord
(supplied).
Connect firmly the white plug to the
. white (L) jack and the red plug to the
red (R) jack.
White
2 Connect the left speaker to the right
speaker with the speaker cable
(supplied). Be sure to keep the speaker
cable away from the antennas.
Gray eefd to O (red)
Black-lined cord to O (black)
Right speaker
Left speaker
H Connect the AC power cord of the
right speaker.
Connect AC power cord of the right
speaker to AC OUTLET on the rear
panel of the tuner MD deck.
Q Set VOLTAGE SELECTOR to match
your local power line voltage
(except for North American model).
Tuner MD deck
VOLTAGE SELECTOR
Right speaker
! >—5-
VOLTAGE SELECTOR
I Connect the power.
Connect the AC power cord of the tuner
MD deck to the wall outlet after you
have made all the above connections.
Inserting two R6 (size AA)
batteries into the remote
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long p>eriod of
time, remove the batteries to avoid possible damage
from battery leakage.
tew