Sony CMT-M11C - Manuel (Page 32)

Dividing recorded
tracks
— Divide Function
You can use this function to add track
numbers to multiple tracks that are recorded
as one track. This function also lets you mark
track numbers after the recording ends. The
total number of tracks increases by one and
all the tracks following the divided ones are
renumbered.
Set the MD/TAPE switch on the remote to
MD.
1 While playing the MD, press Wl on
the MD (or II for MD on the remote)
at the point where you want to
divide.
The deck pauses.
2
Press EDIT/NO until "Divide ?"
appears.
3
Press YES.
"Rehearsal" and "Position ok?" appear
alternately and the portion to be divided
is played repeatedly.
Example: Dividing track 2 into tracks B and
C.
Track
number
Original
tracks
o
DIVIDE
-1 2 3
1 A
c
1
D
1
— Divide track 2 into
tracks B and C.
!l 2 3 4
|~A
f
Bi C
1
D
1
1 ►►►«
2 3 . 4
(ZD cz] im cm
CD CD CJ □
□ il a cn
Set to MD. —fiiiiiii — 1 r~i
• /►►I
Tid
cu CD
CD CD CD
CD CD CD
CD CD CD CD CD
CD CD CD CD CD
• To shift the position to be divided:
1 Press EDIT/NO.
2 While monitoring the sound, press
K4 ◄◄ or ►► on the MD deck
or for MD on the remote) to
the starting point to be divided.
You can check the display and shift
the point between -128 and +127 (±1 is
about 0.06 seconds).
To cancel the divide function at this
time, press ■ for MD.
Press YES again when you find the
point to be divided.
"Complete" appears for a few seconds
and the newly created track begins
playing. The new track will have no
track title even if the original track was
labelled.
Tip
You can also divide tracks while recording. Press
# REC at the desired point.
33
!