Combining recorded tracks, Track, 1 combine tracks b – Sony CMT-M11C Manuel d'utilisation

Page 33: I press or ►►►►! on the, 2 press edit/no until "combine?" appears, 3 press yes, 4 press yes again when you find the portion, Note, Gagin’» i ° i

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising

Combining recorded
tracks

— Combine Function

This function lets you put several tracks or
several independently recorded portions into
a single track. The total number of tracks
decrease by one and all the tracks following
the combined ones are renumbered.
Set the MD/TAPE switch and MD/CD/
TUNER switch on the remote to MD.

Example: Combining tracks B and C.

Track

number

gagin’» i ° I

---- Combine tracks B

■

Press

or ►►►►! on the

MD deck or for MD on
the remote) until the second track of
the two to be combined appears.

For example, to combine tracks 3 and 4,
select track 4.

Press EDIT/NO until "Combine?"

appears.

Press YES.

"Rehearsal" and "Track ok?" appear

alternately and the portion where the
two tracks will join (i.e., the end of the
first track and the beginning of the
second track) is played repeatedly.
If you want to cancel the combine
function at this time, press EDIT/NO or

■ for MD.

Press YES again when you find the

portion.

"Complete" appears for a few seconds

and the tracks are combined.
If both of the combined tracks have track
titles, the title of the second track is
erased.

Note

If "Sorry" appears, the tracks cannot he combined.
This happens when you've edited the same track too
many times. This is due to a technical limitation of
the MD system and is not a mechanical error.

3,4

Set to MD. -

□

CD CD CD CD|

CD 1

IcD

CDfCD CD CD

'CD a

1C5

CD CD CD

ot)

CD CD

CD CD CD

II ni

Advertising