Electric requirements – MIDEA 27 Inch Electric Dryer Owner's Manual Manuel d'utilisation

Page 17

Advertising
background image

17

Dry

er

Saf
ety

Oper

a

tion

R

equir

ements

P

arts and

F

ea
tur
es

Ins
talla

tion

Ins
tructions

Dry

er Use

Appendix

Dry

er Car

e

Tr

oubleshooting

ELECTRIC REQUIREMENTS

The wiring diagram is located on the back board of the unit.

WARNING

The improper connection of the equipment grounding conductor can

result in the risk of electric shock. Check with a qualified electrician

or serviceman if you are in doubt as to whether your dryer is properly

grounded. Do not modify the plug provided with your dryer - if it

doesn’t fit the outlet, have a proper outlet installed by a qualified

electrician.

To prevent unnecessary risk of fire, electrical shock, or personal

injury, all wiring and grounding must be done in accordance with

local codes, or in the absence of local codes, with the National

Electrical Code, ANSI/NFPA No. 70 - Latest Revision (for the U.S.) or

the Canadian Electrical Code CSA C22.1 - Latest Revisions and local

codes and ordinances. It is your responsibility to provide adequate

electrical services for your dryer.

All gas installations must be done in accordance with the National

Fuel Code ANSI/Z2231 - Latest Revision (for the U.S.) or CAN/CGA

- B149 Installation Codes - Latest Revision (for Canada) and local

codes and ordinances.

Electrical connections

An individual branch (or separate) circuit serving only your dryer is

recommended. DO NOT USE AN EXTENSION CORD.

Gas models - U.S. and Canada

A 120Volt, 60Hz AC approved electrical service, with a 15 ampere fuse or

circuit breaker is required.

Electric models - U.S. only

Most dryers require a 240 volt, 60Hz AC approved electrical service. Some

require 208 volt, 60Hz approved electrical service. The electric service

requirements can be found on the data label located behind the door. A

30-ampere fuse or circuit breaker on both sides of the line is required.

If a power cord is used, the cord should be plugged into a 30-ampere

receptacle.

The power cord is NOT provided with U.S. electric model dryers.

Advertising
Ce manuel est liée aux produits suivants: