Danby 24 Inch Over-The-Range Microwave Oven Installation Guide - Manuel (Page 21)

1
2
3
Blower Plate screw
Blower motor screw
Microwave
Back of
B lower Motor
Adapting blower for recirculating exhaust
1. Remove the screws that secure the blower motor. Lift up the blower plate.
2. Pull out the blower unit. Be careful not to stretch the wires and make sure the wires do not get pinched.
Rotate the blower so that it faces toward the front and replace it in the appliance.
3. Secure the blower motor with screws. Secure the blower plate with screws.
INSTALLATION INSTRUCTIONS - RECIRCULATING (NON-VENTED)
20