Maytag MHP1000SQ - Manuel (Page 2)

INSTALLATION REQUIREMENTS
note: If the washer/dryer and pedestal assembly are located in
a garage, 8" (203 mm) must be added under the pedestal so that
the washer/dryer is 18" (460 mm) above the garage floor.
tools and PaRts
Gather the required tools and parts before starting installation.
tools needed:
Utility knife 1/4" hex head ratchet
or open-end wrench
Level 9/16" open-end wrench
Pliers or slip-joint pliers Bucket
additional Items needed:
Towel Sponge
Parts supplied:
Four #12 x 5/8” hex Two retainer clips
head sheet metal (in parts bag)
screws (in parts bag)
2