Levana Jena V1 Manual - Manuel (Page 20)

PROBLEM SOLUTION
Equipment does not function • Confim camera and/or monitor are
switched on
• The battery may be depleted or defective;
charge battery
• The power adapters may not be connected
No reception • Camera and monitor may not be
properly paired
• Camera may be too far away from
the monitor
• The VOX sensitivity may be set too low
Reception Interference (static) • The camera and monitor may be too
far apart
• The battery power may be too low
• Other electronic devices may be interfering
with the signal
• The camera or monitor may be placed too
close to many metal objects
Feedback (screeching, static) • The camera and monitor may be too
close together
• The volume on the monitor may be set
too high
Noise (static, beeping) • Battery power may be too low
Picture works but there is no sound • Volume setting may be too low
Picture is black and white
• Night vision LEDs may be ON; increase
the amount of light in the room
being monitored
The rechargeable battery will
not charge
• The power adapters may not be connected
• Battery pack may not be properly
connected inside the battery compartment
• The monitor may not be properly docked
Maintenance
• Clean the surfaces of the camera and monitor with a soft, fluff-free cloth
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to
not allow water into any openings
• Never use cleaning agents or solvents
TROUBLESHOOTING
20